自动封边机安装前，应检查地面是否结实、平坦，最好将机器安装在混凝地皮面上，以保证机器调定后的稳固性，同时要求安装地点光线度不低于500LUX，并保证有充足空间用于安装、操作工作出入、维修和保养。

　　The machine installation steps are as follows:

　　1、Remove the packaging that fixes the machine parts.

　　2、Place the machine on the ground and adjust the level.

　　3、Fix and install the rolled edge sealing material on the machine with storage and release turntable.

　　4、Connect the external power cord, 220V 50HZ three-phase four-wire power supply, the total power cord diameter should be more than 4 square centimetres.

　　5、Connect the gas source.

　　6, connect the dust pipe to the dust removal equipment.

　　7, check whether the voltage is normal, to ensure that the compressed air is sufficient and dry.

　　Automatic edge banding machine can be used for uneven boards or ripples, burrs or non-perpendicular phenomenon caused by cutting saws, sawing, so that the board sealing border surface is flat, so that the sealing strip and the board fit tightly, so as to achieve a better sealing effect.